NOTE* - orders placed now have an appx ship date of 2 weeks

This is our NEW Universal Lipo Discharger Pro V2...

Very similar to the original Universal Lipo Discharger Pro, but with some minor changes.

Now with 10A Constant Current and Polarity Protection on the Balance Connector.

We wanted to make sure that users of all cell count batteries from 2s to 7s could take advantage of a stand alone discharger and not just those from the bigger packs.  With the new V2, any battery connected to the discharger will discharge at a rate of 10a (constant current). So now it is beneficial to everyone using Lipo Batteries.

No more using your charger to discharge un-used Lipo Packs to Storage Voltage. The Universal Lipo Discharger Pro V2 is a stand alone, self contained Lipo Battery Discharger that will run automatically to ensure a proper and safe discharge.

The Universal Lipo Discharger Pro has an input range of 2s - 7s Lipo Batteries, dual status LED's, dual Cooling Fans, large Heat Sink and most importantly automatically shuts off when storage voltage is reached. The Micro-Controller constantly monitors cell voltage to ensure that as soon as the set storage voltage is reached, that the discharge cycle is automatically stopped to prevent damage to the battery.

Operation is extremely simple and there is nothing to press or a switch to operate. Simply connect the main battery leads, then connect the balance adapter. As soon as the balance adapter is connected, the Universal Lipo Discharger Pro V2 takes control. The dual LED status indicator will show when the battery is discharging by illuminating the red LED. While in discharge mode, the dual cooling fans will automatically start and run during the discharge cycle. When the storage voltage is reached, the discharge cycle is automatically shut off, the green LED will illuminate (and if connected, the Audible Alert will sound) to indicate the discharge cycle is complete.  The fans will continue to run after the discharge cycle has completed to allow for quicker cool down of the unit. Simply disconnect the battery and connect the next one.

If a battery is accidentally left on the discharger for a prolonged period of time after the discharge cycle has completed, the unit will completely shut off when nominal cell voltage reaches appx. 3.75v. This added feature prevents over discharge of connected batteries.

Another feature is that the Universal Lipo Discharger Pro V2 can discharge packs in parallel with the use of parallel adapters for the main battery power leads and balance leads.

Also included is an accessory port that allows the connection of an optional (purchased separately) audible alert that when connected, will sound a buzzer once the discharge cycle has completed.

Battery management will never be as easy with the Universal Lipo Discharger Pro V2!!!




 

Input Voltage: 2s - 7s Lipo / (30v Max)
Discharge Current: 10A Constant Current
Set Storage Voltage: 3.85v (nominal cell voltage) +/- 2%
Length of Battery Input Lead Plug: 6" 14AWG
Plug Type: Pre-Soldered
Size: 80mm x 96.5mm x 55mm
Download Manual  
Download External Cell Balancer Diagram  

Write a review

Please login or register to review

Universal Lipo Discharger Pro V2

  • $115.00


Related Products

Lipo Discharger Pro Audible Alert Accessory

Lipo Discharger Pro Audible Alert Accessory

This is our NEW Lipo..

$15.00

Featured

Lipo Discharger Pro Audible Alert Accessory

Lipo Discharger Pro Audible Alert Accessory

This is our NEW Lipo..

$15.00

Safe Switch Duo Pro V2

Safe Switch Duo Pro V2

This is the NEW Safe..

$75.00

Safe Switch 2 Plus

Safe Switch 2 Plus

The new Safe Switch ..

$40.00

Universal Lipo Discharger Pro V2

Universal Lipo Discharger Pro V2

NOTE* - orders place..

$115.00