• Universal Lipo Discharger Pro V3

CURRENTLY PLEASE ALLOW FOR UP TO 7 DAYS BEFORE ORDER IS SHIPPED

This is our NEW Universal Lipo Discharger Pro V3... 

Here are some of the new features:

  • Increased 10.8 Amp Discharge Load
  • Increased Cooling Air Flow
  • Dual Stage Discharging Cycle
  • Universal JST-XH Balance Connector
  • Built-In Audible Alert
  • Optional Top Fan Guard

Just like the previous V2 Discharger, we wanted to make sure that users of all cell count batteries from 2s to 7s could take advantage of a stand alone, high power discharger for Lipo Battery maintenance.  

No more using your charger to discharge un-used Lipo Packs to Storage Voltage. The Universal Lipo Discharger Pro V3 is a stand alone, self contained Lipo Battery Discharger that will run automatically to ensure a proper and safe discharge down to a nominal 3.85v +/- 1% per cell.

The Universal Lipo Discharger Pro V3 has an input range of 2s - 7s Lipo Batteries, three status LED's, dual Cooling Fans, large Heat Sink, optional top fan guard and most importantly, automatically shuts off when storage voltage is reached. The Micro-Controller constantly monitors cell voltage to ensure that as soon as the set storage voltage is reached, that the discharge cycle is automatically stopped to prevent damage to the battery.  The new V3 is also much more friendly with smaller cell count packs and those packs with lower capacity due to our new Dual Stage Discharging.

Operation is extremely simple and there is nothing to press or a switch to operate. Simply connect the main battery leads, then connect the balance adapter to the new universal JST-XH connector.  As soon as the balance adapter is connected, the Universal Lipo Discharger Pro V3 takes control. The three LED status indicator will show when the battery is discharging at stage 1, stage 2 or completed by illuminating the onboard LED's. While in discharge mode, the dual cooling fans will automatically start and run during the discharge cycles. When the storage voltage is reached, the discharge cycle is automatically shut off, the green LED will illuminate (and if turned on, the new onboard audible alert will sound) to indicate the discharge cycle is complete.  The fans will continue to run after the discharge cycle has completed to allow for quicker cool down of the unit. Simply disconnect the battery and connect the next one.

If a battery is accidentally left on the discharger for a prolonged period of time after the discharge cycle has completed, the unit will completely shut off when nominal cell voltage reaches appx. 3.75v. This added feature prevents over discharge of connected batteries.

Like the V2, the new V3 can discharge packs in parallel with the use of parallel adapters for the main battery power leads and balance leads.

Battery management has never be as easy with the Universal Lipo Discharger Pro V2 and with the release of the new V3, it is even better!!!


Videos below show the original Discharger, but operation is similar



 

Input Voltage: 2s - 7s Lipo / (30v Max)
Stage 1 Discharge Current: 10.8 Amps
Stage 2 Discharge Current 2.5 Amps
Set Storage Voltage: 3.85v (nominal cell voltage) +/- 1%
Length of Battery Input Lead Plug: 6" 14AWG
Plug Type: Pre-Tinned
Balance Connector: Universal JST-XH
Size: 80mm x 96.5mm x 60mm
Download Manual  
Download External Cell Balancer Diagram  

Write a review

Please login or register to review

Universal Lipo Discharger Pro V3

  • $125.00


Available Options


Featured

Lipo Discharger Pro Audible Alert Accessory

Lipo Discharger Pro Audible Alert Accessory

This is our NEW Lipo..

$15.00

Safe Switch Duo Pro V2

Safe Switch Duo Pro V2

This is the NEW Safe..

$75.00

Safe Switch 2 Plus

Safe Switch 2 Plus

The new Safe Switch ..

$40.00

Universal Lipo Discharger Pro V2

Universal Lipo Discharger Pro V2

NOTE* - orders place..

$115.00